How to Use a DJ Controller (Complete Guide)
EQ faders are an important part of any DJ controller. They typically have three different knobs for each channel. High (or treble), mid, and low. Treble knobs are used to pump up or turn down the highest frequencies of your audio. the mid knobs control the volume of frequencies right around the . Jul 05, · The functions of a jog wheel include; scratching, and speeding up and slowing down of a track’s tempo. Touch the face of a jog wheel to scratch for dynamic effects. Or touch the side of either or both of your jog wheels to increase or cut down track tempo for beatmatching.
If you are a DJ, you will agree to the fact that a DJ controller is not of the easiest system to operate. It is not about pressing a couple of buttons here and there. A professional DJ does so much more than that in order to ensure that the crowd has the most amazing time. A DJ should know how to use a controller and this involves setting it up, making sure the beats are right and selecting the right music depending on the crowd.
If a DJ does not know how to use a dj controllerhe might end up with a crowd that is disinterested in his music. If you are a professional DJ and want to whats a good healthy snack before bed a mark in the industry, you need to learn the usage of a DJ controller. If you have invested in the right equipment, you need to use it in an efficient manner. It is not easy to use a DJ controller; it requires a lot of work and mixing the beat in order to keep the energy of the audience.
If you are not comfortable using what happens if you get aids equipment, the audience will immediately get to know of your shortcomings and might not enjoy your music. A DJ controller is very similar to a turntable deck. It gives you a deck experience while allowing you to control the DJ software.
You can use your laptop as a screen while using the controller. The controller will be compatible with cj type of DJ software but you need to check the model before you make a decision. It will how many tattoos does jwoww have you a range of tools that can enhance your mixing experience and boost the energy of the crowd. You can change the entire experience of DJing if you are using the right equipment.
For a beginner, it might seem like a daunting task ho learn the equipment but once you get a knack for it, there will be no looking back. You need to take one step at a time and learn how each button functions and how it affects your music.
Tips on using the DJ controller If you know how to use a DJ controller, you can use the tips which will enhance your experience.
Seek the help of a professional dontrol take you through the process of being a DJ, if you are an amateur, you will be able to learn a great deal from the professionals about mixing the beats and ensuring the crowd loves you. Research the equipment before you begin to use it. You can research online or read the user manual thoroughly. Check if the controller is compatible with the du or does it have any special requirements.
You need to ensure that you have a sound card. Most controllers have an inbuilt card but it is better to check if it is compatible with your system. Use music that is compatible with the DJ controller. Recent Articles. Building up a new tech brand can be a difficult and daunting process.
Read more. Long, long ago Perhaps, it Smart Investing Strategies: How to grow your money in ? Business Tech Exclusive - Modified date: February 8, 0.
If the past year taught any lessons at all, the biggest one has been the importance of savings. The times have been hard on The arena of search t optimization is ever-changing. To drive more traffic, uow need to keep up with the latest trends. Inserting the right Therefore, moving to a cashless economy and Mac computers are highly regarded and used worldwide for business and fun!
That said, just like any other computers, there are not short of Managing and maintaining inventory levels is one of the critical aspects of the retail howw. Too little inventory elevates the risk of out-of-stocks, while Gaming is fun and ddj for sure; no wonder you enjoy playing it most of the time.
In case you think of yourself as If you are a Mac owner, you will probably know that the operating system has a great reputation from the built-in security perspective. Starting a Business in Philadelphia? Philadelphia is a prosperous city in Pennsylvania, a state in the USA. It is the 6th most populated city of the country and is As a user, you need to keep Burning of fossil fuels like coal and mineral oils increases the carbon emissions in the environment.
Besides, these resources do not replete as fast Related Stories.
DJ Control Starlight
Oct 07, · loveescortus.com you just getting started as a DJ? Or maybe you’ve always wanted to be a DJ and you find yourself intimidated by some of the equipment?. May 09, · A DJ should know how to use a controller and this involves setting it up, making sure the beats are right and selecting the right music depending on the crowd. If a DJ does not know how to use a dj controller, he might end up with a crowd that is disinterested in his music. Using a DJ Controller. If you are using a Serato DJ Controller, the playback speed of the track can be controlled by the tempo slider/dial on the hardware. Moving the slider or knob will speed up or slow down the track at the tempo range that is currently set. You can adjust the tempo range using the relative buttons on your Serato DJ controller. Available pitch range is hardware dependant, and therefore .
Watching an expert DJ using one of the best DJ controllers with features several flashing lights and buttons can be overwhelming for a beginner. DJ controllers are equipped to assist with mixing audio files by utilizing software, knobs, faders, touch strips, backlit buttons, jog wheels, and various other elements. DJ controllers are usually designed to mimic the classic two CDJs and mixer setup.
However, DJ controllers can be designed to handle much more than this. DJ controllers are typically a lot more affordable than a typical CDJ and mixer setup.
This might be why you chose to get a controller in the first place. These are DJ controllers that are suited for a performer who wants to have plenty of sampler drum pads for playing different sound bites, those that mimic a traditional DJ setup, affordable ones for those that solely want to make DJing a hobby, some for those who are established club DJs always on the move, and so on. On this page, we will break down how to use a DJ controller and all the common parts, features, and connections that you need to be aware of.
You just bought your first controller; how do you use it? First, you need to know what all the button function are. Every controller features ports that attach to your PA system.
Here are what each of these buttons looks like:. As you are connecting your DJ controller to your PA system, you will need to have all or some of these types of cords. As a professional DJ, it is common practice to have plenty of each of these cords in your possession. Thankfully, it seems that the days of using bare speaker wire are over, though. In the rare occurrence that you find yourself needing to use bare speaker wire, you can always get banana plugs to make the connection easily done on over to your PA system.
These are the cables that you would typically use for connecting DJ headphones and PA speakers to your sound system. They are a popular type of cord for any sort of DJ setup. XLR cables may not necessarily be used with your DJ controller to connect to your PA system, but they are very commonly used on controllers, mixers, and audio interfaces for connecting to a microphone.
One to use as your main microphone cord, and another to have in case the other one breaks in the middle of a set this can happen. XLR cables are a necessary component of any professional DJ setup. RCA cables will be the most common cord that you will need to have in your setup for connecting your DJ controller. These cords are normally connected on the back of your controller in the red and white ports over to the matching red and white ports on your audio interface.
These are an adapter that every DJ keeps with them in their gig bags. The FX section on the top left is for managing the sound FX. This is something which depends on your use of DJ software.
As we can see in the above example, there are various buttons reserved for playing different sound effects. With your DJ software, you will be able to customize which buttons do what. Your looping features can also be easily customized both on software and your controller.
Looping features are usually found in the same location as the FX station, depending on which exact controller you are using. Typically, you can use sound effects or set up loops using either your DJ controller or software. Either way, it is easy to understand once you begin using it with the DJ software. Loops can be set up in sets of 4, 8, 16, or more measures. Many DJs will use loops during the transition process, or to make a live remix of a particular song.
There will be a tempo fader on about any DJ controller. This can alter the speed of the record playing. If you want to make the song play faster, slide it up towards the positive sign. Many DJs will speed up or slow a song down four to five BPMs progressively during the course of a song to help shift to the next track. The main perk of the sync button is that it matches the tempo instantly between two decks.
However, when pressed while the song is playing it will sound a lot worse than simply using the slip mode with your platter or tempo fader knobs. The platter for a standard DJ controller has two traits. When slip mode is turned on you can use the platter to regulate the speed of the track playing.
The vinyl mode is used to make the platter function like a vinyl turntable for scratching. When you hold shift and rotate the top while the record is playing, it fast-forwards or fast-reverse. Tempo faders can typically be customized to manage how drastic of a tempo change you can make with the tempo fader when you go all the way up or all the way down. These buttons are perhaps the most straightforward to understand. Normally, it is a big button like we see in the example above. If your controller has shift buttons, these are used much like the shift button on your computer.
It simply allows you to use the second feature of a particular button. The cue buttons on your DJ controller come in two different locations and serve two different purposes. To eliminate any sort of confusion right away, there are cue buttons you use for changing the start location of a track, and those which are used to control which deck plays into your headphones.
Regardless, both are used while you are planning out your next song transition. The big cue buttons you typically see placed among the sampler drum pads can be pressed to change where a certain song starts. When they are pressed down, they will play from the desired location until you let go of the button. Sometimes there is only one cue button, but there can also be multiple cue buttons on your controller.
EQ faders are an important part of any DJ controller. They typically have three different knobs for each channel. High or treble , mid, and low. Treble knobs are used to pump up or turn down the highest frequencies of your audio. Low EQ knobs are used to control the volume of bass, kicks, and other low frequencies in an audio track. In order to control all of the EQ knobs simultaneously, simply use the volume faders or master volume knobs. Finally, the crossfader is used to control which channel you are on.
In the above example, the crossfader is placed slightly closer to channel two. This means that you will mainly hear channel two on the PA system, but perhaps also some faint elements of channel one. This all depends on what your crossfader settings are set up as. Typically, the crossfader will be used in the smooth setting. This is what this looks like visually:. When you start to get into scratching, you might choose to use different crossfader settings.
For now, this is the basic function that you should be aware of. In most cases, the smooth crossfader function will be the most commonly used one for transitions. This way, you can slowly blend between two tracks. Advanced scratching DJs use a quick-cut crossfader feature that looks something like this:. As mentioned, you will probably use the top setting the most. The quick-cut crossfader feature is best for DJs who need to move the crossfader back and forth quickly in order to assist with scratching techniques.
Once you are ready to start mastering advanced scratching techniques, the quick-cut feature will start to prove itself valuable. When you press the sampler button, it enables you to use pads to play a short sound FX, like your DJ name. They are also usually sensitive to velocity. Make the buttons cease playing when you take your hand off the pad and you can even try to scratch while playing with your samples.
You will also see these buttons on every DJ controller. Typically, your controller will come with preset functions for each of these buttons. However, you can also use your software to adjust what happens when you press each of the buttons. This is known as MIDI mapping. Although heavily dependent on your controller and software, this is done by going into your software settings and pressing a few buttons.
Usually, it is very straightforward and simple to change the functions of your drum pads. When you get used to DJing with two channels, you may get too cozy and want to add your personal style. Many DJ controllers with a simple 2-deck design have the ability to play more than two decks.
Typically, they will have a button which allows you to switch the deck to channel three or channel four. However, if you are not able to do this, you can simply do this using your software. The majority of DJ software includes the capability to use more than two decks. However, not all controllers have the ability to mix more than two decks.
Commonly, people will choose to simply use the software instead of their controller. This way, you can still play more than two decks simultaneously.
The clear downside here is that you would have a more difficult time controlling channels not supported by your controller. Connecting with your software is normally pretty straightforward. Before you purchase your controller, one of the first things that you should do is check to see if your favorite software has a MIDI map to support it. This means that the software needs to be mapped to fit the needs of your controller. Otherwise, your DJ controller will be just as useful as a brick with buttons.
The advancement of powerful DJ software, including hardware to manage it, has been a massive development for the market. The industry is still growing, and consumers can pick which controller fits their work process, software choice, and budget.